Workpiece Measurement: TS 750/TS 150

Specifications

Workpiece touch probe	TS 750	TS 150
Probing accuracy	≤ ±1 µm with use of the T434 standard stylus (at a probing speed of 500 mm/min)	≤ ±5 µm with use of the T404 standard stylus (at a probing speed of 1000 mm/min)
Probe repeatability Repeated probing from one direction	2 s ≤ 0.25 µm	2 s ≤ 1 µm
Probing force	Axial: 1.5 N Radial: 0.2 N	Axial: 7 N Radial: 1 N
Deflection of probe contact	≤ 5 mm in all directions (with stylus length L = 40 mm)
Deflection forces	Axial: 8 N Radial: 1 N
Probing speed	≤ 3 m/min
Protection EN 60529	IP68
Operating temperature	10 °C to 40 °C
Storage temperature	–20 °C to 70 °C
Mass without base	0.1 kg	0.1 kg
Fastening*	Base with M22x1 thread and axial cable outlet Base with three M3 screws and axial cable outlet Base with four M3 screws and axial cable outlet Optional: touch-probe extension with M16x1 thread
Electrical connection*	Two-pole sliding contact on the mounting base
Signal transmission	Cable: ≤ 25 m
Supply voltage1)	DC 15 V to 30 V at ≤ 85 mA (without load)
Output signals1)	Trigger signals S and S (square-wave signal and its inverted signal) Floating trigger output
HTL signal levels1)	UH ≥ 20 V at –IH ≤ 20 mA UL ≤ 2.8 V at –IL ≤ 20 mA at rated voltage of DC 24 V
* Please select when ordering 1) Via UTI 150

TS 750/TS 150